Store Categories

Dell Equallogic PS6110X 24-Bay SFF 2.5" SAN Storage 24x 600GB 10K 2x 10GbE iSCSI

Click on Thumbnails to Enlarge

Dell Equallogic PS6110X 24-Bay SFF 2.5" SAN Storage 24x 600GB 10K 2x 10GbE iSCSI

Dell Equallogic PS6110X 24-Bay SFF 2.5" SAN Storage 24x 600GB 10K 2x 10GbE iSCSI

Availability: In stock

Qty in Stock:  0 0 3


Product Details

Dell Equallogic PS6110X 24-Bay SFF 2.5" SAN Storage 14.4TB 24x 600GB 10K HDDs 2x 10GbE iSCSI Type 14 Controllers 2x Power Supplies

Condition: Clean, tested pull - Guaranteed 100% working! Controllers are running V10.0.3 R469188 firmware.

30-Day Warranty!

Included in the listings:

Qty 1  x Dell Equallogic PS6110X 4-Bay SFF 2.5" SAN Storage
Qty 24 x Dell Equallogic 600GB 10K 6G SAS Enterprise Hard Drives
Qty 2  x Dell Equallogic 10Gb/s Type 14 Controllers
Qty 2  x Dell Equallogic PS6110X 700W Power Supplies
Qty 1  x Dell D414M EqualLogic PS6110 Front Bezel Faceplate with Key
Qty 2  x Power Cord, Black, NEMA 5-15P to C13, 18WG, IEC 320, 6 foot

Manufacturer's description and specifications:

The Dell™ EqualLogic™ PS6100X and PS6110X storage arrays provide a balance of performance and capacity for your enterprise data center with 21.6 TB in a SAS 2U/2.5" drive solution. The PS6110X also offers you increased throughput with 10GbE and the flexibility of using SFP+ or 10GBASE-T (copper) so you can leverage your existing infrastructure or build out lower-cost 10GBASE-T.

Performance and capacity where and when you need it

The EqualLogic PS6100X continues the EqualLogic tradition of performance scaling linearly with capacity. With up to 67% IOPS improvements on typical workloads over previous-generation EqualLogic arrays, the PS6100 Series is designed to grow with your data demands—all while providing simple management and seamless expansion. And, the PS6110X provides the same capacity and density of the PS6100X with the throughput of 10GbE.

Enterprise power with everyday simplicity

PS Series arrays are based on a virtualized modular storage architecture that enables you to purchase only the storage you need when you need it. PS6100 and PS6110 Series storage arrays include SAN configuration features and capabilities that sense network connections, automatically build RAID sets, and conduct system health checks. All PS Series arrays in a SAN work together to automatically manage data, load balance across all resources, and expand to meet your growing storage needs. The reliable PS6100X and PS6110X arrays also include fault-tolerant capabilities through use of fully redundant and hot-swappable controllers, fan trays, power supplies, and disk drives with hot spares, as well as vertical port sharing.

Feature-rich software portfolio

The EqualLogic PS Series arrays include innovative firmware and host software with no additional cost or software licensing fees. EqualLogic’s firmware offers benefits to your organization so your hardware can continue to meet your current needs and is ready to grow with you as the demands of the virtual era increase. Data Center Bridging can provide deterministic performance with a converged SAN and LAN network, designed to greatly reduce or eliminate dropped packets (available on 10GbE arrays only). PS Series arrays automatically tier data to optimize pool performance at the sub-volume level—delivering the right data to the right place at the right time. EqualLogic Host Software extends the functionality of the array-based software enabling cooperation with the host. Host Integration Tools for Microsoft®, VMware®, and Linux® products as well as EqualLogic SAN Headquarters (SANHQ) management software are included with your EqualLogic array purchase.

Find your storage solution

With a variety of systems built for capacity and performance, there is a Dell EqualLogic solution designed to suit your needs. And with comprehensive ell Data Management Services that help plan, design, implement and support an efficient data management strategy and ecosystem, you can satisfy today’s data availability, retention and recovery requirements while preparing to meet the demands of tomorrow.

Product configuration Dell™ EqualLogic™ PS6110X
Storage controllers Dual controllers, each with 4GB memory for PS Series firmware. Each controller provides cache to flash for data protection
Network interfaces 10GbE connectivity with one (1) 10GBASE-T with RJ45, one (1) 10GbE SFP+ for fibre or twin-ax copper cabling, and one (1) 100BASE-TX dedicated management port per controller
Hard disk drives Twenty-four (24) 10K SAS hot-pluggable hard disk drives (Twelve (12) drive configuration available. Please contact your Dell Sales Representative for details.)
Drive capacities 2.5" 10,000 RPM SAS drives available in 300 GB, 600 GB and 900 GB
System capacities 7.2 TB using twenty-four (24) 300 GB 10,000 SAS disk drives; 14.4 TB using twenty-four (24) 600 GB† 10,000 SAS disk drives; 21.6 TB using twenty-four (24) 900 GB 10,000 SAS disk drives
Technical highlights  
Volumes Up to 1,024
Snapshots 512 per volume/up to 10,000 total per group
Volume connections per PS series group Up to 1,024
OS supported Windows® 2000 Server, Windows Server® 2003, Windows Server® 2008, including Hyper-V™, Windows Vista®, Windows Server® 2008 R2 including Hyper-V™, Windows XP®, Red Hat® Enterprise Linux®, SUSE® Linux® Enterprise, Sun™ Solaris™, IBM® AIX®, HP-UX, Mac OS® X, VMware® ESX Server 3/3.5/4/4.1/5, ESXi 3.5/4/4.1/5, Citrix® XenServer™, Novell® NetWare®
RAID support RAID 5, RAID 6, RAID 10, and RAID 50
TCP network support IPv4, IPv6 core support
Expansion option Can be combined with other EqualLogic PS Series arrays in the same SAN group, online. Up to 16 total members per group.
  • Vertical port sharing
  • Redundant hot-swappable controllers, power supplies/cooling fans, and hot-swappable disks
  • Individual disk drive slot power control
Enclosure monitoring system
  • Automatic spare configuration and utilization
  • Automatic bad block replacement
  • Auto-Stat Disk Monitoring System (ADMS) to monitor health of data on disk drives
Management interfaces
  • SAN Headquarters multi-group performance and event monitoring tool
  • Serial console
  • Ability to configure a separate management network
  • SNMP, telnet, SSH, HTTP, Web (SSL), host scripting
  • Multi-administrator support
  • CHAP authentication
  • Access control for iSCSI
  • Access control for management interfaces including Active Directory, LDAP, or RADIUS support
Notification methods SNMP traps, e-mail, syslog
  • AC voltage: 100-240 VAC +10% single phase
  • 700W (max, total), +5V up to 155W; +12V up to 924W; +5Vsb up to 10W
  • Frequency: 50/60 Hz Power factor: 0.98 (minimum)
  • Power supplies: Dual 700 W
  • 5° to 40°C (41° to 104°F)
  • Storage temperature: -40° to 65°C (-40° to 149°F)
  • For altitudes above 2950 feet, the maximum operating temperature is derated 1°F/550 ft
  • Operating Relative humidity: 20% to 80% (noncondensing) with a maximum humidity gradation of 10% per hour
  • Operational shock: Half-sine shock 31G +/- 5% with a pulse duration of 2.6ms +/- 10% in operational orientations only
  • Operating Vibration: 0.26 Grms (5 to 350 Hz) for 5 minutes in operational orientations
  • Acoustics Category 4: <=7.2 bels at 23C +/- 2C
  • Airborne contaminant level of G1 or lower as defined by ISA-S71.04-1985
  • Height: 2U/8.68 cm (3.41 inches)
  • Width 44.63 cm (17.57 inches)
  • Depth: 54.1 cm (21.3 inches)
  • Weight: 25.4 kg (56 lb)